Gemisky - Professional Electrostatic Dissipation and Solutions

+86 18664997916

info@esdgemisky.com

language

ESD Bent Handle Brush

ESD Brushes are made in Electrostatic Discharge (ESD) protective materials protect contents from static electricity and electrocstatic damage. These materials are desiged to absorb the charge and pass it to the ground, saving you thousands of dollars by reducing or eliminating product damage. it conforms to ANSIESD S20.20 1999 requiremet. This standard requires conducive materials suface resistance to be <1.0x10^4 ohms and dissipatve malerials to be>1.0×10^4 chms to <1.0×10^9 ohms when tested per EOS/ESD S11.11. The materials also confirm to the static decay requirement of FTM-101B, Method 4046.1 disspating a 5000 Volt charge to 0 when grounded in less tan 2seconds. It has a surface resistance greater than or equal to 1.0x10^4ohms but less then 1.0x10^9ohms or surface resistivity greater than or equal to 1.0x10^8ohms/square but less recommended at the higher end of the temperature range. Electrical properties are affected by humidity. ESD brush handle - polypropylene material Bristle - Nylon

keywords：

ESD

category：

ESD Brush

Hotline：

+86 18664997916

contact

ESD Bent Handle Brush

ESD Brushes are made in Electrostatic Discharge (ESD) protective materials protect contents from static electricity and electrocstatic damage. These materials are desiged to absorb the charge and pass it to the ground, saving you thousands of dollars by reducing or eliminating product damage. it conforms to ANSIESD S20.20 1999 requiremet.
This standard requires conducive materials suface resistance to be <1.0x10^4 ohms and dissipatve malerials to be>1.0×10^4 chms to <1.0×10^9 ohms when tested per EOS/ESD S11.11. The materials also confirm to the static decay requirement of FTM-101B, Method 4046.1 disspating a 5000 Volt charge to 0 when grounded in less tan 2seconds.
It has a surface resistance greater than or equal to 1.0x10^4ohms but less then 1.0x10^9ohms or surface resistivity greater than or equal to 1.0x10^8ohms/square but less recommended at the higher end of the temperature range. Electrical properties are affected by humidity.
ESD brush handle - polypropylene material
Bristle - Nylon

not

ESD Straight Handle Brush